产品列表PRODUCTS LIST

首页 > 技术与支持 > VEGA VIB S61系列振动开关产品数据表
VEGA VIB S61系列振动开关产品数据表
点击次数:1454 更新时间:2017-10-12


VEGAVIB S 61 

Vibrating level switch for granulates 
Easy setup without adjustment 
Product-independent switching point 
Optimum rod design avoids buildup and jamming 
Easy cleaning 
Wear and maintenance free 

Function 
The vibrating rod of VEGAVIB is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two colour LED. No special adjustments are required to set up VEGAVIB S 61.

Area of application 

VEGAVIB S 61 is used as a level switch in free flowing powders, granulates and coarse grained solids and detects reliably and accuray when a point level is reached. The optimum rod design avoids jamming and buildup of bulk solid material. It is ideal as a high or low level switch in a vessel detecting foodstuffs, perishable or granulate materials,which could be retained in a fork solids level probe. 

Technical data

Process pressure   -1…16 bar
Process temperature   -50…  +150℃
Density  ≥ 100 g/l 
Material housing   plastic PBT 
Protection    IP 66/IP 67 
Materials, wetted parts   316L 
Approval    option: ATEX II 1/3 D IP6X T 
Electronics transistor (NPN/PNP) 
Load current    max. 400 mA 
Turn-on voltage   max. 55 V DC 
Supply voltage    10…55 V DC 
Power consumption   max. 0.5 W 

Electronics double relay (DPDT) 
Supply voltage    20…253 V AC, 50/60 Hz, 20…72 V DC 
Power consumption   1…8 VA (AC), approx. 1.3 W (DC) 
Turn-on voltage   min. 10 mV / max. 253 V AC/DC 
Switching current   min. 10 μA / max. 3 A AC, 1 A DC 
Breaking capacity   max. 750 VA, 54 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories:Sliding lock fitting (extended versions) pressurised or unpressurised for adjustable switch point

VEGAVIB S 61
振动极限开关,用于颗粒状的固料
安装方便, 无需调整
产品独立开关点
优化杆设计避免了堆积和干扰
易清洗

功能
VEGAVIB 的振动杆由压电晶体激发, 并以固定振幅振动。如果振动杆被产品覆盖, 则通过整体电子学检测振幅变化并转换成开关信号。开关情况从外面是可看见的通过LED指示灯显示。设置 VEGAVIB S 61 不需要进行特殊调整。

应用领域
VEGAVIB S 61 在自由流动的粉末、颗粒和粗粒固体中被用作电平开关, 并在达到点水平时进行可靠和准确的检测。*杆设计避免了大块固体材料的干扰和堆积。它是理想的作为一个高或低电平开关的船舶检测食品, 易腐或粒材料, 这可以保留在一个叉子固体水平探头。

技术资料

工艺压力-1..。16 bar
工艺温度-50... + 150℃
密度≥100克/升
材料外壳塑料 PBT
保护 ip 66/ip 67
材料, 湿部316L
批准选项: ATEX II 1/3 D IP6X T
电子晶体管 (NPN/PNP)
负载电流zui大值400 mA
开启电压zui大值55 V DC
电源电压 10…55 V DC
功耗zui大值0.5 W
电子双继电器 (双)
电源电压 20…253伏 AC, 50/60 赫兹, 20…72 V DC
功耗 1…8 VA (AC), 约 1.3 W (DC)
开启电压zui小10毫伏/zui大 253 V 交/直流
开关电流zui小 10 a/zui大值3 a AC, 1 DC
zui大破坏容量750 VA, 54 W

附件: 滑动锁配件 (扩展版) 加压或 unpressurised 可调开关点

以上即为VEGA VIB S61 6263的相关介绍,如有任何技术咨询或需要相关技术资料,请前往www.ize-industries.com相关页面进行下载。

 

Baidu
map